Rent Anritsu CellMaster MT8212E Cable, Antenna and Base Station Analyzer

Anritsu Cell Master MT8212E Base Station Analyzer
Anritsu introduces its latest generation compact handheld Base Station Analyzer for installation and maintenance of wireless networks. Designed as a lightweight base station tester meeting virtually all testing needs by an RF technician. The Cell Master features Signal Analyzer options for 2G, 3G and 4G cellular networks including LTE, and WiMAX for digital broadcast.

This optimal combination of base station test capabilities in one handheld device eliminates the need for several independent test instruments, thereby reducing the number of tools the user must carry and learn to operate. Whether it’s sweeping cables, making power measurements, finding interference, troubleshooting base station signal quality, or verifying backhaul performance, the Cell Master MT8212E is the ideal all-in-one instrument to help keep your network up and running.

Cable & Antenna Analyzer Highlights:

Rent Anritsu MT8212E

Measurements: RL, VSWR, Cable Loss, DTF, Phase
2-port Transmission Measurement: High/Low Power
Sweep Speed: 1 msec/data point, typical
Display : Single or Dual Measurement Touchscreen\
Calibration: OSL, InstaCal™, and FlexCal™
Bias Tee: 32 V internal

Spectrum & Interference Analyzer Highlights:

Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I
Interference Analyzer: Spectrogram, Signal Strength, RSSI, Signal ID
Dynamic Range: > 95 dB in 1 Hz RBW
DANL: -152 dBm in 10 Hz RBW
Phase Noise: -100 dBc/Hz max @ 10 kHz offset at 1 GHz
Frequency Accuracy: < ±50 ppb with GPS On

Rent Anritsu CellMaster MT8212E

Cable and Antenna Analyzer
Measurements     VSWR
Return Loss
Cable Loss
Distance-to-Fault (DTF) Return Loss
Distance-to-Fault (DTF) VSWR
1-Port Phase
Smith Chart
Setup Parameters
Measurement Display     Single/Dual Measurement Display with independent markers
Frequency     Start/Stop, Signal Standard, Start Cal
DTF     Start/Stop, DTF Aid, Units (m/ft), Cable Loss, Propagation Velocity, Cable, Windowing
Windowing     Rectangular, Normal Side Lobe, Low Side Lobe, Minimum Side Lobe
Amplitude     Top, Bottom Auto Scale, Full Scale
Sweep     Run/Hold, Single/Continuous, RF Immunity (High/Low), Data Points, Averaging/Smoothing, Output Power (High/Low)
Data Points     137, 275, 551, 1102, 2204
Markers     Markers 1-6 (On/Off), Delta Makers 1-6 (On/Off), Marker to Peak/Valley, Marker Table
Traces     Recall, Copy to Display Memory, No Trace Math, Trace ± Memory, Trace Overlay
Limit Line     On/Off, Single Limit, Multi-segment (41), Limit Alarm, Clear
Calibration     Start Cal, Cal Type (Standard/FlexCal™)
Save/Recall     Setups, Measurements, Screen Shots Jpeg (save only)
Frequency Range     2 MHz to 4 GHz
Frequency Accuracy     =±2.5 ppm @ 25 °C
Frequency Resolution     1 kHz, (RF immunity low)
100 kHz, (RF immunity high)
Output Power
High     0 dBm, typical
Low     -30 dBm, typical
Interference Immunity
On-Channel     +17 dBm @ >1.0 MHz from carrier frequency
On-Frequency     0 dBm within ±10 kHz of the carrier frequency
Measurement Speed
Return Loss     =1.00 msec/data point, RF immunity low, typical
Distance-to-Fault     =1.25 msec/data point, RF immunity low, typical
Return Loss
Measurement Range     0 to 60 dB
Resolution     0.01 dB
Measurement Range     1 to 65
Resolution     0.01
Cable Loss
Measurement Range     0 to 30 dB
Resolution     0.01 dB
Vertical Range Return Loss     0 to 60 dB
Vertical Range VSWR     1 to 65
Fault Resolution (meters)     (1.5 x 108 x vp)/?F (vp = velocity propagation constant, ?F is F2-F1 in Hz)
Horizontal Range (meters)     0 to (Data Points-1) x Fault Resolution, to a maximum of 1500 meters (4921 ft)
1-Port Phase
Measurement Range     -180° to +180°
Resolution     0.01°
Smith Chart
Resolution     0.01
Measurement Accuracy
Corrected Directivity     >42 dB, OSL Calibration
>38 dB, InstaCal™ Calibration

Spectrum Analyzer
Smart Measurements     Field Strength (uses antenna calibration tables to measure dBm/m2 or dBmV/m)
Occupied Bandwidth (measures 99% to 1% power channel of a signal)
Channel Power (measures the total power in a specified bandwidth)
ACPR (adjacent channel power ratio)
AM/FM/SSB Demodulation (wide/narrow FM, USB and LSB), (audio out only)
C/I (carrier-to-interference ratio)
Setup Parameters
Frequency     Center/Start/Stop, Span, Frequency Step, Signal Standard, Channel #
Amplitude     Reference Level (RL), Scale, Attenuation Auto/Level, RL Offset, Pre-Amp On/Off, Detection
Span     Span, Span Up/Down (1-2-5), Full Span, Zero Span, Last Span
Bandwidth     RBW, Auto RBW, VBW, Auto VBW, RBW/WBW, Span/RBW
File     Save, Recall, Delete, Directory Management
Save/Recall     Setups, Measurements, Limit Lines, Screen Shots Jpeg (save only), Save-on-Event
Save-on-Event     Crossing Limit Line, Sweep Complete, Save-then-Stop, Clear All
Delete     Selected File, All Measurements, All Mode Files, All Content
Directory Management     Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB, Copy, Format USB
Application Options     Bias-Tee (On/Off), Impedance (50 O, 75 O, Other)
Sweep Functions
Sweep     Single/Continuous, Manual Trigger, Reset, Detection, Minimum Sweep Time, Trigger Type,
Gated Sweep (see Option 0090)
Detection     Peak, RMS, Negative, Sample, Quasi-peak
Triggers     Free Run, External, Video, Change Position, Manual
Trace Functions
Traces     Up to three Traces (A, B, C), View/Blank, Write/Hold, Trace A/B/C Operations
Trace A Operations     Normal, Max Hold, Min Hold, Average, # of Averages, (always the live trace)
Trace B Operations     A ? B, B??C, Max Hold, Min Hold
Trace C Operations     A ? C, B??C, Max Hold, Min Hold, A – B ? C, B – A ? C, Relative Reference (dB), Scale
Marker Functions
Markers     Markers 1-6 each with a Delta Marker, or Marker 1 Reference with Six Delta Markers, Marker Table (On/Off), All Markers Off
Marker Types     Style (Fixed/Tracking), Noise Marker, Frequency Counter Marker
Marker Auto-Position     Peak Search, Next Peak (Right/Left), Peak Threshold %, Set Marker to Channel, Marker Frequency to Center, Delta Marker to Span, Marker to Reference Level
Marker Table     1-6 markers frequency and amplitude plus delta markers frequency amplitude and offset
Limit Line Functions
Limit Lines     Upper/Lower, On/Off, Edit, Move, Envelope, Advanced, Limit Alarm, Default Limit
Limit Line Edit     Frequency, Amplitude, Add Point, Add Vertical, Delete Point, Next Point Left/Right
Limit Line Move     To Current Center Frequency, By dB or Hz, To Marker 1, Offset from Marker 1
Limit Line Envelope     Create Envelope, Update Amplitude, Points (41 max), Offset, Shape Square/Slope
Limit Line Advanced     Type (Absolute/Relative), Mirror, Save/Recall
Frequency Range     100 kHz to 4 GHz (usable to 0 Hz)
Maximum Continuous Input     +26 dBm
Tuning Resolution     1 Hz
Frequency Reference     Aging: ±1.0 ppm/year
Accuracy: ±1.5 ppm (25 °C ±25 °C) + aging, < ±50 ppb with GPS On
Frequency Span     10 Hz to 4 GHz including zero span
Sweep Time     Minimum 100 ms, 10 µs to 600 seconds in zero span
Sweep Time Accuracy     ±2% in zero span
Resolution Bandwidth (RBW)     10 Hz to 3 MHz in 1–3 sequence ±10% (1 MHz max in zero-span) (–3 dB bandwidth)
Video Bandwidth (VBW)     1 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth)
RBW with Quasi-Peak Detection     200 Hz, 9 KHz, 120 kHz (-6 dB bandwidth)
VBW with Quasi-Peak Detection     Auto VBW is On, RBW/VBW = 1
Spectral Purity
SSB Phase Noise @ 1 GHz     -100 dBc/Hz, -110 dBc/Hz typical @ 10 kHz offset
-105 dBc/Hz, -112 dBc/Hz typical @ 100 kHz offset
-115 dBc/Hz, -121 dBc/Hz typical @ 1 MHz offset
Amplitude Ranges
Dynamic Range     >95 dB (2.4 GHz), 2/3 (TOI-DANL) in 10 Hz RBW
Measurement Range     DANL to +26 dBm
Display Range     1 to 15 dB/div in 1 dB steps, ten divisions displayed
Reference Level Range     -130 dBm to +30 dBm
Attenuator Resolution     0 to 55 dB in 5 dB steps
Amplitude Units     Log Scale Modes: dBm, dBV, dBmv, dBµV
Linear Scale Modes: nV, µV, mV, V, kV, nW, µW, mW, W, kW
Amplitude Accuracy
100 kHz to 40 GHz
±1.25 dB, ±0.5 dB typical
Residual Spurious     <-90 dBm (RF input terminated, 0 dB input attenuation, > 10 MHz)
Input-Related Spurious     <-75 dBc (0 dB attenuation, -30 dBm input, span <1.7 GHz, carrier offset >4.5 MHz)
Exceptions, typical     <-70 dBc @ <2.5 GHz, with 2072.5 MHz Input
<-68 dBc @ F1-280 MHz with F1 Input
<-70 dBc @ F1 + 190 MHz with F1 Input
<-52 dBc @ 7349-2F2 MHz, with F2 Input, where F2 < 2424.5 MHz
Third-Order Intercept (TOI)
Preamp Off (-20 dBm tones 100 kHz apart, 10 dB attenuation)
800 MHz     +16 dBm
2400 MHz     +20 dBm
200-2200 MHz     +25 dBm, typical
>2.2 GHz to 4.0 GHz     +28 dBm, typical
Second Harmonic Distortion
Preamp Off, 0 dB input attenuation, -30 dBm input
50 MHz     -56 dBc
>50 MHz to 200 MHz     -60 dBc, typical
>200 MHz to 3000 MHz     -70 dBc, typical
2:1, typical

Lease Anritsu CellMaster MT8212E Cable, Antenna and Base Station Analyzer