Rent Anritsu MS2712E HandHeld Spectrum Master Analyzer

Details

Anritsu MS2712E Spectrum Analyzer
Anritsu introduces its next generation compact handheld Spectrum Analyzers to meet the needs for portability. Whether it is for spectrum monitoring, broadcast proofing, interference analysis, RF and microwave measurements, or Wi-Fi and wireless network measurements, the Spectrum Master is the ideal instrument for making fast and reliable measurements.

Rent MS2712E

Highlights:

Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I
Interference Analyzer: Spectrogram, Signal Strength, RSSI, Signal ID
Dynamic Range: > 95 dB in 10 Hz RBW
DANL: -152 dBm in 10 Hz RBW
Phase Noise: -100 dBc/Hz max @ 10 kHz offset at 1 GHz
Frequency Accuracy: < ±50 ppb with GPS On
2-port Transmission Measurements: High/Low Power
Traces: Normal, Max Hold, Min Hold, Average, # of Averages
Detectors: Peak, Negative, Sample, Quasi-peak, and true RMS
Markers: 6, each with a Delta Marker, or 1 Reference with 6 Deltas
Limit Lines: up to 41 segments with one-button envelope creation
Trace Save-on-Event: crossing limit line or sweep complete

Rent Anritsu MS2712E

Capabilities:

GSM/EDGE, W-CDMA/HSDPA, TD-SCDMA, CDMA/EV-DO
WiMAX-Fixed, Mobile
LTE
ISDB-T, ISDB-T SFN
Store 2000 Traces internally
Gated Sweep
CW Signal Generator
Internal Preamplifier standard
Internal Bias-Tee
Internal Power Meter
High Accuracy Power Meter
GPS tagging of saved traces
4, 6, 8, 18 GHz Power Sensors
Channel Scanner
< 5 minute warm-up time
3 hour battery operation time
Touchscreen keyboard
USB Data Transfer
Master Software Tools

Specifications:
Spectrum Analyzer
Measurements
Smart Measurements     Field Strength (uses antenna calibration tables to measure dBm/m2 or dBmV/m)
Occupied Bandwidth (measures 99% to 1% power channel of a signal)
Channel Power (measures the total power in a specified bandwidth)
ACPR (adjacent channel power ratio)
AM/FM/SSB Demodulation (wide/narrow FM, USB and LSB), (audio out only)
C/I (carrier-to-interference ratio)
Setup Parameters
Frequency     Center/Start/Stop, Span, Frequency Step, Signal Standard, Channel #, Channel Increment
Amplitude     Reference Level (RL), Scale, Attenuation Auto/Level, RL Offset, Pre-Amp On/Off, Detection
Span     Span, Span Up/Down (1-2-5), Full Span, Zero Span, Last Span
Bandwidth     RBW, Auto RBW, VBW, Auto VBW, RBW/WBW, Span/RBW
File     Save, Recall, Delete, Directory Management
Save/Recall     Setups, Measurements, Limit Lines, Screen Shots Jpeg (save only), Save-on-Event
Save-on-Event     Crossing Limit Line, Sweep Complete, Save-then-Stop, Clear All
Delete     Selected File, All Measurements, All Mode Files, All Content
Directory Management     Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB, Copy, Format USB
Application Options     Bias-Tee (On/Off), Impedance (50 O, 75 O, Other)
Sweep Functions
Sweep     Single/Continuous, Manual Trigger, Reset, Detection, Minimum Sweep Time, Trigger Type,
Gated Sweep (see Option 0090)
Detection     Peak, RMS, Negative, Sample, Quasi-peak
Triggers     Free Run, External, Video, Change Position, Manual
Trace Functions
Traces     Up to three Traces (A, B, C), View/Blank, Write/Hold, Trace A/B/C Operations
Trace A Operations     Normal, Max Hold, Min Hold, Average, # of Averages, (always the live trace)
Trace B Operations     A ? B, B??C, Max Hold, Min Hold
Trace C Operations     A ? C, B??C, Max Hold, Min Hold, A – B ? C, B – A ? C, Relative Reference (dB), Scale
Marker Functions
Markers     Markers 1-6 each with a Delta Marker, or Marker 1 Reference with Six Delta Markers,
Marker Table (On/Off), All Markers Off
Marker Types     Style (Fixed/Tracking), Noise Marker, Frequency Counter Marker
Marker Auto-Position     Peak Search, Next Peak (Right/Left), Peak Threshold %, Set Marker to Channel,
Marker Frequency to Center, Delta Marker to Span, Marker to Reference Level
Marker Table     1-6 markers frequency and amplitude plus delta markers frequency amplitude and offset
Limit Line Functions
Limit Lines     Upper/Lower, On/Off, Edit, Move, Envelope, Advanced, Limit Alarm, Default Limit
Limit Line Edit     Frequency, Amplitude, Add Point, Add Vertical, Delete Point, Next Point Left/Right
Limit Line Move     To Current Center Frequency, By dB or Hz, To Marker 1, Offset from Marker 1
Limit Line Envelope     Create Envelope, Update Amplitude, Points (41 max), Offset, Shape Square/Slope
Limit Line Advanced     Type (Absolute/Relative), Mirror, Save/Recall
Frequency
Frequency Range     100 kHz to 4 GHz
Maximum Continuous Input     +26 dBm
Tuning Resolution     1 Hz
Frequency Reference     Aging: ±1.0 ppm/year
Accuracy: ±1.5 ppm (25 °C ±25 °C) + aging, < ±50 ppb with GPS On
Frequency Span     10 Hz to 4 GHz including zero span
Sweep Time     Minimum 100 ms, 10 µs to 600 seconds in zero span
Sweep Time Accuracy     ±2% in zero span
Bandwidth
Resolution Bandwidth (RBW)     10 Hz to 3 MHz in 1–3 sequence ±10% (1 MHz max in zero-span) (–3 dB bandwidth)
Video Bandwidth (VBW)     1 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth) (auto or manually selectable)
RBW with Quasi-Peak Detection     200 Hz, 9 KHz, 120 kHz (–6 dB bandwidth)
VBW with Quasi-Peak Detection     Auto VBW is On, RBW/VBW = 1
Spectral Purity
SSB Phase Noise @ 1 GHz     -100 dBc/Hz, -110 dBc/Hz typical @ 10 kHz offset
-105 dBc/Hz, -112 dBc/Hz typical @ 100 kHz offset
-115 dBc/Hz, -121 dBc/Hz typical @ 1 MHz offset
Amplitude Ranges
Dynamic Range     >95 dB (2.4 GHz), 2/3 (TOI-DANL) in 10 Hz RBW
Measurement Range     DANL to +26 dBm
Display Range     1 to 15 dB/div in 1 dB steps, ten divisions displayed
Reference Level Range     -130 dBm to +30 dBm
Attenuator Range     0 to 55 dB in 5 dB steps
Amplitude Units     Log Scale Modes: dBm, dBV, dBmv, dBµV
Linear Scale Modes: nV, µV, mV, V, kV, nW, µW, mW, W, kW
Amplitude Accuracy
100 kHz to 4.0 GHz     ±1.25 dB, ±0.5 dB typical
>4.0 GHz to 6 GHz     ±1.50 dB, ±0.5 dB typical
Displayed Average Noise Level (DANL)
Preamp Off
(Reference level -20 dBm)     Preamp On
(Reference level -50 dBm)
(RBW Normalized to 1 Hz, 0 dB attenuation)     Maximum     Typical     Maximum     Typical
10 MHz to 2.4 GHz     -141 dBm     -146 dBm     -157 dBm     -162 dBm
>2.4 GHz to 4 GHz     -137 dBm     -141 dBm     -154 dBm     -159 dBm
>4 GHz to 5 GHz     -134 dBm     -138 dBm     -150 dBm     -155 dBm
> 5 GHz to 6 GHz     -126 dBm     -131 dBm     -143 dBm     -150 dBm
(RBW = 10 Hz, 0 dB attenuation)
10 MHz to 2.4 GHz     -131 dBm     -136 dBm     -147 dBm     -152 dBm
>2.4 GHz to 4 GHz     -127 dBm     -131 dBm     -144 dBm     -149 dBm
>4 GHz to 5 GHz     -124 dBm     -128 dBm     -140 dBm     -145 dBm
> 5 GHz to 6 GHz     -116 dBm     -121 dBm     -133 dBm     -140 dBm
Spurs
Residual Spurious     <-90 dBm (RF input terminated, 0 dB input attenuation, > 10 MHz)
Input-Related Spurious     <-75 dBc (0 dB attenuation, -30 dBm input, span <1.7 GHz, carrier offset >4.5 MHz)
Exceptions, typical     <-70 dBc @ <2.5 GHz, with 2072.5 MHz Input
<-68 dBc @ F1-280 MHz with F1 Input
<-70 dBc @ F1 + 190.5 MHz with F1 Input
<-52 dBc @ 7349-2F2 MHz, with F2 Input, where F2 < 2424.5 MHz
<-55 dBc @ 190.5 ± F1/2 MHz, F1 <1 GHz
Third-Order Intercept (TOI)
Preamp Off (-20 dBm tones 100 kHz apart, 10 dB attenuation)
800 MHz     +16 dBm
2400 MHz     +20 dBm
200-2200 MHz     +25 dBm, typical
>2.2 GHz to 5.0 GHz     +28 dBm, typical
>5.0 GHz to 6.0 GHz     +33 dBm, typical
Second Harmonic Distortion
Preamp Off, 0 dB input attenuation, -30 dBm input
50 MHz     -56 dBc
>50 MHz to 200 MHz –     -60 dBc, typical
>200 MHz to 3000 MHz     -70 dBc, typical
VSWR
2:1, typical

10 MHz BW Demod (Option 0009)     Required for all signal analyzers except AM/FM/PM Signal Analyzer, Option 509

AM/FM/PM Signal Analyzers (Option 0509)
Measurements
RF Spectrum
AM/FM/PM     RF Spectrum
AM/FM/PM     Audio Spectrum
(FM/PM)     Audio
Waveform
(AM)     Audio
Waveform
(FM/PM)     Summary
(AM)     Summary
(FM/PM)
Graphic
Display     Power (dBm)
vs. Frequency     Depth (%)
vs. Modulation
Frequency     Deviation
(kHz/rad) vs.
Modulation
Frequency     Depth (%)
vs. Time     Deviation
(kHz/rad)
vs. Time     None     None

Numerical
Displays     Carrier Power
Carrier Frequency
Occupied
Bandwidth     AM Rate
RMS Depth
(Pk-PK)/2 Depth
SINAD
THD
Distortion/Total
Vrms     FM/PM Rate
RMS Deviation
(Pk-PK)/2
Deviation
SINAD
THD
Distortion/Total
Vrms     AM Rate
RMS Depth
(Pk-PK)/2 Depth
SINAD
THD
Distortion/Total
Vrms     FM/PM Rate
RMS Depth
(Pk-PK)/2 Depth
SINAD
THD
Distortion/Total
Vrms     RMS Depth (AM)
Peak + Depth
Peak – Depth
(Pk-PK)/2 Depth
Carrier Power
Carrier
Frequency
Occupied
Bandwidth
AM Rate
SINAD
THD
Distortion/Total
Vrms     RMS Deviation
(FM/PM)
Peak + Depth
Peak – Depth
(Pk-PK)/2 Depth
Carrier Power
Carrier
Frequency
Occupied
Bandwidth
AM Rate
SINAD
THD
Distortion/Total
Vrms
Setup Parameters     Center Freq, Span, Freq Step, Signal Standard, Channel, Channel Increment,
Set Carrier Freq
Amplitude     Scale, Power Offset, Adjust Range
Setup     Demod Type (AM, FM, PM), IFBW, Auto IFBW
Measurements     RF Spectrum AM/FM/PM, Audio Spectrum (AM/FM/PM),
Audio Waveform (AM/FM/PM), Summary (AM/FM/PM)
Marker     On/Off, Delta, Peak Search, Marker Freq to Center, Marker to Ref Lvl, Marker Table,
All Markers Off
Specifications
AM     Modulation Rate: ±1 Hz (<100 Hz), ±2% (>100 Hz)
Depth: ±5% for (Modulation rates 10 Hz to 100 kHz)
FM     Modulation Rate: ±1 Hz (<100 Hz); ±2% (100 Hz to 100 kHz)
Deviation Accuracy: ±5% (100 Hz to 100 kHz)
PM     Modulation Rate: ±1 Hz (<100 Hz); ±2% (100 Hz to 100 Hz)
Deviation Accuracy: ±5% (deviation 0 to 93 Rad, rate 10 Hz to 5 kHz)
IF bandwidth     1 to 300 kHz in 1-3 sequence
Frequency Span     RF Spectrum: 10 kHz to 10 MHz
Audio Spectrum: 2, 5, 10, 20 kHz
RBW/VBW     30
Span/RBW     100
Sweep time     50 µs to 50 ms (Audio Waveform)

Lease Anritsu MS2712E Cable & Antenna Analyzers Rental