Rent Anritsu S114B Cable Antenna Analyzer 5 to 1200 MHz

Details

The Site Master S114B, with a frequency range of 5 to 1200 MHz (and 100 kHz to 1200 MHz Spectrum Analysis), is a hand held SWR/RL (standing wave ratio/return loss), and Distance-To- Fault (DTF) measurement instrument that includes a built-in synthesized signal source. All models include a keypad to enter data and a liquid crystal display (LCD) to provide graphic indications of SWR or RL over the selected frequency range and selected distance. The Site Master is capable of up to 2.5 hours of continuous operation from a fully charged field-replaceable battery and can be operated from a 12.5 dc source. Built-in energy conservation features can be used to extend battery life over an eight-hour work day.

The Site Master is designed for measuring SWR, return loss, or cable insertion loss and locating faulty RF components in antenna systems. Power monitoring is available as an option. The displayed trace can be scaled or enhanced with frequency markers or a limit line. A menu option provides for an audible “beep” when the limit value is exceeded. To permit use in low-light environments, the LCD can be back lit using a front panel key.

The Site Master Software Tools program also performs DTF (Distance To Fault) and Fault Location.

Specifications

Site Master
Frequency Range: 5 to 1200 MHz
Frequency Accuracy: (RF Source Mode) 75 parts per million @ 25°C*
Frequency Resolution: 10 kHz

Rent S114B

SWR:
Range: 1.00 to 65.00
Resolution: 0.01

Return Loss:
Range: 0.00 to 54.00 dB
Resolution: 0.01 dB

Wattmeter Power Monitor:
Range: –80.0 to +80 dBm or 10.0 pW to 100.0 kW
Offset Range: 0 to +60.0 dB
Resolution: 0.1 dB or 0.1 xW
Test Port, Type N 50 Ohms
***Immunity to Interfering signals up to the level of: +10 dBm, reflection

Maximum Input (Damage Level):
Test Port, Type N: +22 dBm
RF Detector: +20 dBm

Measurement Accuracy:
Measurement accuracy depends on calibration components. Precision calibration components have a directivity of 42 dB.

Cable Insertion Loss:
Range: 0.00 to 54.00 dB
Resolution: 0.01 dB

Spectrum Analyzer:

Frequency Range: 100 kHz to 1200 MHz
Frequency Reference
Aging: ±1 ppm/yr
Accuracy: ±2 ppm
Frequency Span: 0 Hz (zero span) 100 kHz to 1200 MHz
Sweep Time: 0.5 sec.
Resolution Bandwidth: 10 kHz, 30 kHz, 100 kHz, 1 MHz
Accuracy: ± 20% typical
Video Bandwidth: 3 kHz, 10 kHz, 30 kHz and 300 kHz

 Rent Anritsu S114B

SSB Phase Noise
@ (1 GHz) 30 kHz offset: –75 dBc/Hz

Spurious Responses
Input Related: –45 dBc

Spurious
Residual Responses: –95 dBm
Note: 10 kHz resolution bandwidth, input terminated, no attenuation

Amplitude
Measurement Range: –90 dBm to +20 dBm typical
Dynamic Range: 60 dB typical
Maximum Safe Input Level: +20 dBm, maximum measurable safe input
+27 dBm, maximum damage
+27 dBm, peak pulse power
+50 Vdc
Displayed Average Noise
Level: –90 dBm (400 kHz span) typical

Display Range
Log Scale: 2 to 15 dB/div. In 1 dB steps. Ten divisions displayed.

Frequency Response
RF Input: VSWR 2.0:1
Resolution: (Ref. Level) 1.0 dB
Total Level Accuracy: ±2 dB 200 kHz,     3 dB <200 kHz typical

General

Internal Memory:
Trace Memory: 200 maximum
Instrument config.: 10 setup locations
RS-232: 9 pin D-sub, three wire serial
Electromagnetic Compatibility: Meets European community requirements for CE marking

Power Supply:
External DC Input: +11 to +15 Vdc, 1250 mA max.

Temperature:
Storage: –20° C to 75° C
Operation: 0° C to 50° C

Weight: 1.82 kg (4.0 pounds)
Dimensions: 25.4 x 17.8 x 6.1 cm
(10 x 7 x 2.4 inches)

 Lease Anritsu S114B Cable Antenna Analyzer 5 to 1200 MHz Rental